COUNTER GEAR REASSEMBLY


  1. INSTALL COUNTER GEAR FRONT BEARING OR ROLLER


    1. A01KHREE01

      Using SST and a press, install the counter gear front bearing to the counter gear.

      SST
      09515-10010

      Tech Tips

      Install so that the snap ring groove of the bearing will face to the front side.

  2. INSTALL COUNTER GEAR FRONT BEARING SNAP RING NO.2


    1. A01KEX1

      Select the counter gear front bearing snap ring No. 2 so that the thrust gap between the counter gear and the counter gear front bearing snap ring No. 2 will be within the specification. Using a brass bar and a hammer, install it to the counter gear.

      Standard clearance
      0.1 mm (0.0039 in.) or less
      Mark Thickness mm (in.)
      A 2.05 to 2.10 (0.0807 to 0.0827)
      B 2.10 to 2.15 (0.0827 to 0.0846)
      C 2.15 to 2.20 (0.0846 to 0.0866)
      D 2.20 to 2.25 (0.0866 to 0.0886)
      E 2.25 to 2.30 (0.0886 to 0.0906)
      F 2.30 to 2.35 (0.0906 to 0.0925)