INSTALL CLUTCH PEDAL PAD
Install the clutch pedal pad to the clutch pedal.
INSTALL PEDAL SPRING HOOK (DOUBLE TIRE (2KD-FTV))
Install the spring hook to the clutch pedal.
INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH
Apply MP grease to inside of a new bush.
|
MP grease |
Install the bush to the clutch pedal.
INSTALL CLUTCH PEDAL TURNOVER BUSH
Apply MP grease to inside of a new bush.
|
MP grease |
Install the turnover bush to the clutch pedal.
INSTALL CLUTCH PEDAL NO.1 CUSHION
Install the clutch pedal No. 1 cushion to the clutch pedal.
INSTALL CLUTCH PEDAL SHAFT COLLAR
Apply MP grease to inside and outside of the collar.
|
MP grease |
Apply MP grease to both side of 2 new bushes.
Install the collar and 2 new bushes to the clutch pedal.
INSTALL CLUTCH PEDAL SUB-ASSEMBLY
Install the clutch pedal to the bracket with the clutch pedal shaft, washer and nut.
INSTALL TURN OVER SPRING SEAT COMPRESSION SPRING
Apply MP grease to the contact surface of the bush and the spring.
Install the spring to the clutch pedal and the clutch pedal support.
INSTALL CLUTCH PEDAL SPRING (DOUBLE TIRE (2KD-FTV))
Apply MP grease to outside of the clutch pedal spring.
|
MP grease |
Install the clutch pedal spring.
INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS W/HOLE PIN
Apply MP grease to the contact surface of the hole pin and the bush.
Connect the clevis to the clutch pedal with the hole pin.
Tech Tips
Install the hole pin from the right side of the vehicle.
Install the clip to the hole pin.
INSTALL CLUTCH PEDAL BRACKET
Install the clutch pedal bracket to the vehicle with the 3 bolts.
INSTALL CLUTCH MASTER CYLINDER TO 2 WAY TUBE
Using a union nut wrench, connect the tube to the clutch master cylinder.
Connect the clutch reservoir tube to the clutch master cylinder.
BLEED CLUTCH PIPE LINE
Fill the reservoir tank with fluid bleed and clutch system.
CHECK CLUTCH FLUID LEAKAGE
INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY
CHECK FLUID LEVEL IN RESERVOIR