STARTER (for 2.7 kW Type) INSTALLATION


  1. INSTALL STARTER


    1. Install the starter with the bolt and nut.

      Torque:
      68 N*m  { 693 kgf*cm, 50 ft.*lbf }
    2. Install the wire harness with the nut.

      Torque:
      9.8 N*m  { 100 kgf*cm, 87 ft.*lbf }
    3. Connect the connector.

  2. INSTALL NO. 3 AIR HOSE


    1. A01KFE9

      Connect the No. 3 air hose and secure the hose clamps as shown in the illustration.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    6.4 N*m  { 65 kgf*cm, 56 in.*lbf }
  4. INSTALL TRANSMISSION SERVICE HOLE COVER SUB-ASSEMBLY (for Double Cab)

    A01KIQM

    1. Install the transmission service hole cover with the 12 bolts.

  5. INSTALL NO. 4 MAT SET PLATE (for Double Cab)

    A01KGPT

    1. Install the mat set plate with the 6 screws.

  6. INSTALL REAR FLOOR MAT (for Double Cab)

  7. INSTALL REAR DOOR SCUFF PLATE LH (for Double Cab)

    A01KINS

    1. Install the rear door scuff plate with the 3 screws.

  8. INSTALL REAR DOOR SCUFF PLATE RH (for Double Cab)

    A01KF1Z

    1. Install the rear door scuff plate with the 3 screws.