EXHAUST GAS TEMPERATURE SENSOR (w/ DPF) INSTALLATION


  1. INSTALL NO. 3 EXHAUST GAS TEMPERATURE SENSOR


    1. Using a 14 mm union nut wrench, install the No. 3 exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note


      • If the sensor is dropped, replace it with a new one.

      • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  2. INSTALL NO. 2 EXHAUST GAS TEMPERATURE SENSOR


    1. Using a 14 mm union nut wrench, install the No. 2 exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note


      • If the sensor is dropped, replace it with a new one.

      • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  3. INSTALL EXHAUST GAS TEMPERATURE SENSOR


    1. Using a 14 mm union nut wrench, install the exhaust gas temperature sensor.

      Torque:
      30 N*m  { 306 kgf*cm, 22 ft.*lbf }

      Note


      • If the sensor is dropped, replace it with a new one.

      • Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench Click here.

  4. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here

  5. INSPECT FOR EXHAUST GAS LEAK