ACCELERATOR PEDAL INSTALLATION


  1. INSTALL ACCELERATOR LINK ASSEMBLY (for LHD)


    1. Install the accelerator link assembly with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • Avoid physical shock to the accelerator link assembly.

      • Do not disassemble the accelerator link assembly.

    2. Connect the accelerator link assembly connector.

    3. Install the accelerator pedal with the 2 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
  2. INSTALL ACCELERATOR LINK ASSEMBLY (for RHD)


    1. Install the accelerator link assembly with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Note


      • Avoid physical shock to the accelerator link assembly.

      • Do not disassemble the accelerator link assembly.

    2. Connect the accelerator link assembly connector.

  3. INSTALL ACCELERATOR LINK ASSEMBLY (w/o Heater)


    1. Install the accelerator pedal with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. Install the pedal to the accelerator link rod.

    3. Connect the accel position sensor connector.

    4. Connect the accelerator wire with the clip.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    6.4 N*m  { 65 kgf*cm, 57 in.*lbf }