REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
Remove the 2 clips.
Detach the 3 clips and remove the lower instrument panel finish panel sub-assembly LH.
Disconnect each connector.
REMOVE ANTENNA ASSEMBLY WITH HOLDER
Disconnect the plug from the antenna cord sub-assembly.
| *1 | String |
Tie a string around the plug of the antenna assembly with holder.
Tech Tips
Use a string that is longer than the antenna assembly with holder.
Remove the 2 screws.
Pull the antenna assembly with holder out of the vehicle together with the string.
Tech Tips
The string will be used when installing the antenna assembly with holder, so leave the string passed through the pillar.