TURN SIGNAL FLASHER ASSEMBLY INSTALLATION


  1. INSTALL TURN SIGNAL FLASHER ASSEMBLY


    1. Install the turn signal flasher assembly with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. Connect the connector.

    3. Install the heater control and accessory assembly with the 3 screws.

  2. INSTALL NO. 2 INSTRUMENT PANEL BOX


    1. Attach the 3 clips and 2 guides to install the No. 2 instrument panel box.

    2. Install the bolt <G>.

  3. INSTALL NO. 1 INSTRUMENT PANEL BOX


    1. Attach the 2 wire harness clamps.

    2. Attach the 4 clips, claw and guide to install the No. 1 instrument panel box.

    3. Install the bolt <G>.

  4. INSTALL INSTRUMENT PANEL BOX ASSEMBLY


    1. Attach the 6 clips to instrument panel box.

  5. INSTALL LOWER INSTRUMENT COVER SUB-ASSEMBLY


    1. Attach the 4 clips and guide to install the lower instrument cover sub-assembly.

    2. Install the 2 bolts <D>.

    3. Install the clip.

  6. INSTALL FUSE BOX OPENING COVER


    1. Attach the 2 guides and 2 claws to install the fuse box opening cover.

  7. INSTALL LOWER INSTRUMENT PANEL


    1. Attach the 8 clips to install the lower instrument panel.

    2. Install the 3 bolts <D>.

    3. Install the clip.

  8. INSTALL INSTRUMENT PANEL BOX HOLDER


    1. Install the instrument panel box holder with the 2 screws <E>.

  9. INSTALL LOWER INSTRUMENT COVER


    1. Install the 4 clips to install the lower instrument cover.

  10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH


    1. Connect each connector.

    2. Attach the 5 clips to install the lower instrument panel finish panel sub-assembly.

  11. INSTALL STEREO OPENING COVER


    1. Install the stereo opening cover with the 4 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }
  12. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. Attach the 13 clips to install the center instrument cluster finish panel sub-assembly.