FRONT AIRBAG SENSOR ON-VEHICLE INSPECTION


  1. INSPECT NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle not Involved in Collision)


    1. Perform a diagnostic system check Click here.

  2. INSPECT NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)


    1. Perform a diagnostic system check Click here.

    2. Visually check the No. 2 airbag sensor assembly for defects if the front bumper of the vehicle or the area around the bumper is damaged.


      1. The defects are as follows:


        • Cracks on the sensor housing

        • Dents on the sensor housing

        • Chips on the sensor housing

        • Cracks or other damage to the connector

        • Damage to the serial number

        OK
        No defects are found.

        Tech Tips

        If any of the defects mentioned above are found, replace the No. 2 airbag sensor assembly with a new one.

  3. INSPECT NO. 2 AIRBAG SENSOR ASSEMBLY (for Vehicle Involved in Collision and Airbag is Deployed)


    1. When airbags have deployed as the result of a collision, be sure to replace the No. 2 airbag sensor assembly when it is in a damaged area (anywhere in need of repair).

    2. Visually check the No. 2 airbag sensor assembly when it is in an undamaged area for defects.


      1. The defects are as follows:


        • Cracks on the sensor housing

        • Dents on the sensor housing

        • Chips on the sensor housing

        • Cracks or other damage to the connector

        • Damage to the serial number

        OK
        No defects are found.

        Tech Tips

        If any of the defects mentioned above are found or a No. 2 airbag sensor assembly has detected a major collision, replace the No. 2 airbag sensor assembly with a new one.