VACUUM PUMP INSTALLATION


  1. INSTALL VACUUM PUMP ASSEMBLY


    1. A01CHS6

      Install a new O-ring and the vacuum pump with the 2 nuts.

      Torque:
      55 N*m  { 560 kgf*cm, 41 ft.*lbf }

      Note

      Do not damage the O-ring.

  2. INSTALL VACUUM PIPE


    1. A01CHUTE01

      Connect the vacuum pipe to the vacuum pump assembly with 2 new gaskets and the union bolt (A).

      Torque:
      Union bolt (A)
      13 N*m  { 130 kgf*cm, 10 ft.*lbf }
    2. Install the vacuum hose and 2 clamps with the 2 bolts (B).

    3. Move the clip and connect the vacuum hose to the vacuum pipe.

  3. INSTALL NO. 3 NOZZLE LEAKAGE PIPE SUB-ASSEMBLY


    1. A01CITXE01

      Connect the No. 3 nozzle leakage pipe sub-assembly with 2 new gaskets and the 2 union bolts (B).

      Torque:
      Union bolt (B)
      13 N*m  { 130 kgf*cm, 10 ft.*lbf }
    2. Install the clamp and the No. 3 nozzle leakage pipe sub-assembly with the bolt (A).

  4. INSTALL OIL LEVEL GAUGE SUB-ASSEMBLY


    1. A01CGKK

      Install the oil level gauge sub-assembly with the nut.

      Torque:
      13 N*m  { 130 kgf*cm, 10 ft.*lbf }

      Note

      Do not damage the O-ring.

  5. INSTALL VACUUM PUMP OIL PIPE SUB-ASSEMBLY


    1. A01CJ6ZE01

      Install the vacuum pump oil pipe sub-assembly with 3 new gaskets and the 3 union bolts.

      Torque:
      Union bolt (A)
      13 N*m  { 130 kgf*cm, 10 ft.*lbf }
      Torque:
      Union bolt (B)
      20 N*m  { 200 kgf*cm, 15 ft.*lbf }
  6. INSTALL FUEL FILTER TO INJECTION PUMP FUEL PIPE


    1. A01CHTPE01

      Using SST, connect the 2 union nuts (B).

      SST
      09023-12901
      Torque:
      without SST
      44 N*m  { 448 kgf*cm, 32 ft.*lbf }
      with SST
      40 N*m  { 407 kgf*cm, 29 ft.*lbf }

      Note


      • Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).

      • This torque value is effective when SST is parallel to a torque wrench.

    2. Install the nut (A) and the clamp.