DRAIN BRAKE FLUID
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE BRAKE ACTUATOR WITH BRACKET
Pull the lock lever.
Disconnect the brake actuator connector.
Note
Be careful not to allow brake fluid to enter the removed connector.
Using SST, disconnect the 6 brake lines.
Use tags or make a memo to identify the places to reconnect.
*1: To front wheel cylinder RH
*2: To front wheel cylinder LH
*3: To rear wheel cylinder RH
*4: To rear wheel cylinder LH
*5: From master cylinder (Rear side)
*6: From master cylinder (Front side)
Remove the 3 bolts and the brake actuator with bracket.
Note
Do not damage the brake lines or wire harness.