TILT CAB CONTROL SWITCH INSPECTION


  1. INSPECT TILT CAB CONTROL SWITCH


    1. A01CIFVE01
      Text in Illustration
      *a

      Component without harness connected

      (Tilt Cab Control Switch)

      *b Pushed
      *c Not pushed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 Not pushed 10 kΩ or higher
      Pushed Below 1 Ω

      If the result is not as specified, replace the tilt cab control switch.