REAR POWER SEAT CONTROL SYSTEM(for Second Row) TERMINALS OF ECU


  1. CHECK FOLD SEAT CONTROL ECU RH

    B005P4LN15

    1. Disconnect the x3 and x4 fold seat control ECU RH connectors.

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Terminal No.

      (Symbol)

      Wiring Color Terminal Description Condition Specified Condition
      x3-1 (ECUB) - Body ground W - Body ground Battery power supply Always 11 to 14 V
      x3-3 (IG) - Body ground B - Body ground IG power supply Engine switch on (IG) 11 to 14 V
      Engine switch off Below 1 V
      x3-40 (IND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
      x4-1 (IND1) - Body ground B - Body ground Battery power supply Always 11 to 14 V
      x4-2 (+B) - Body ground W - Body ground Battery power supply Always 11 to 14 V
      x4-9 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
      x4-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
    3. Reconnect the x3 and x4 fold seat control ECU RH connectors.

    4. Measure the resistance and voltage and check for pulses according to the value(s) in the table below.

      Terminal No.

      (Symbol)

      Wiring Color Terminal Description Condition Specified Condition
      x3-7 (RCLR) - Body ground SB - Body ground Rear power seat switch RH (return switch) signal Rear power seat switch RH off → on (return) 11 to 14 V → Below 1 V
      x3-8 (SG1) - Body ground G - Body ground Ground Always Below 1 Ω
      x3-10 (SFLD) - x3-8 (SG1) P - G Fold motor position sensor signal Motor operating Pulse generation
      x3-11 (SV1) - x3-8 (SG1) R - G Fold motor position sensor power supply Engine switch off → on (IG) Below 1 V → 5.5 to 8 V
      x3-12 (RCLF) - Body ground G - Body ground Rear power seat switch RH (fold switch) signal Rear power seat switch RH off → on (fold) 11 to 14 V → Below 1 V
      x3-17 (P) - Body ground GR - Body ground Driving condition signal
      • Engine switch on (IG), shift lever in P → not in P

      • Engine switch on (IG), stop light switch assembly on → off

      • Engine switch on (IG), parking brake applied → released

      11 to 14 V → Below 1 V
      Engine switch off 11 to 14 V
      x3-18 (R CL) - Body ground P - Body ground Rear door courtesy light switch assembly RH signal Rear door RH opened → closed 11 to 14 V → Below 1 V
      x3-19 (BDCY) - Body ground R - Body ground Back door courtesy light switch signal Back door opened → closed 11 to 14 V → Below 1 V
      x3-25 (RTRN) - Body ground B - Body ground Fold seat switch assembly (return switch) signal (for Rear RH Seat) Fold seat switch assembly (for Rear RH Seat) off → on (return) 11 to 14 V → Below 1 V
      x3-26 (FOLD) - Body ground L - Body ground Fold seat switch assembly (fold switch) signal (for Rear RH Seat) Fold seat switch assembly (for Rear RH Seat) off → on (fold) 11 to 14 V → Below 1 V
      x4-3 (RCL+) - Body ground P - Body ground Reclining motor operation signal Rear power seat switch RH off → on (fold) Below 1 V → 11 to 14 V
      x4-4 (FLD+) - Body ground L - Body ground Fold motor operation signal Rear power seat switch RH or Fold seat switch assembly (for Rear RH Seat) off → on (fold) Below 1 V → 11 to 14 V
      x4-7 (RCL-) - Body ground LG - Body ground Reclining motor operation signal Rear power seat switch RH off → on (return) Below 1 V → 11 to 14 V
      x4-8 (FLD-) - Body ground SB - Body ground Return motor operation signal Rear power seat switch RH or Fold seat switch assembly (for Rear RH Seat) off → on (return) Below 1 V → 11 to 14 V
  2. CHECK FOLD SEAT CONTROL ECU LH

    A01REW6N16

    1. Disconnect the y3 and y4 fold seat control ECU LH connectors.

    2. Measure the resistance and voltage according to the value(s) in the table below.

      Terminal No.

      (Symbol)

      Wiring Color Terminal Description Condition Specified Condition
      y3-1 (ECUB) - Body ground W - Body ground Battery power supply Engine switch on (IG) 11 to 14 V
      y3-3 (IG) - Body ground B - Body ground IG power supply Engine switch on (IG) 11 to 14 V
      Engine switch off Below 1 V
      y3-40 (IND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
      y4-1 (IND1) - Body ground B - Body ground Battery power supply Always 11 to 14 V
      y4-2 (+B) - Body ground W - Body ground Battery power supply Always 11 to 14 V
      y4-9 (GND2) - Body ground W-B - Body ground Ground Always Below 1 Ω
      y4-10 (GND) - Body ground W-B - Body ground Ground Always Below 1 Ω
    3. Reconnect the y3 and y4 fold seat control ECU LH connectors.

    4. Measure the resistance and voltage and check for pulses according to the value(s) in the table below.

      Terminal No.

      (Symbol)

      Wiring Color Terminal Description Condition Specified Condition
      y3-7 (RCLR) - Body ground SB - Body ground Rear power seat switch signal LH (return switch) signal Rear power seat switch LH off → on (return) 11 to 14 V → Below 1 V
      y3-8 (SG1) - Body ground G - Body ground Ground Always Below 1 Ω
      y3-10 (SFLD) - y3-8 (SG1) P - G Fold motor position sensor signal Motor operating Pulse generation
      y3-11 (SV1) - y3-8 (SG1) R - G Fold motor position sensor power supply Engine switch off → on (IG) Below 1 V → 5.5 to 8 V
      y3-12 (RCLF) - Body ground G - Body ground Rear power seat switch LH (fold switch) signal Rear power seat switch LH off → on (fold) 11 to 14 V → Below 1 V
      y3-17 (P) - Body ground GR - Body ground Driving condition signal
      • Engine switch on (IG), shift lever in P → not in P

      • Engine switch on (IG), stop light switch assembly on → off

      • Engine switch on (IG), parking brake applied → released

      11 to 14 V → Below 1 V
      Engine switch off 11 to 14 V
      y3-18 (R CL) - Body ground P - Body ground Rear door courtesy light switch assembly LH signal Rear door LH opened → closed 11 to 14 V → Below 1 V
      y3-19 (BDCY) - Body ground R - Body ground Back door courtesy light switch signal Back door opened → closed 11 to 14 V → Below 1 V
      y3-25 (RTRN) - Body ground B - Body ground Fold seat switch assembly (fold switch) signal (for Rear LH Seat) Fold seat switch assembly (for Rear LH Seat) off → on (return) 11 to 14 V → Below 1 V
      y3-26 (FOLD) - Body ground L - Body ground Fold seat switch assembly (fold switch) signal (for Rear LH Seat) Fold seat switch assembly (for Rear LH Seat) off → on (fold) 11 to 14 V → Below 1 V
      y4-3 (RCL+) - Body ground P - Body ground Reclining motor operation signal Rear power seat switch LH off → on (fold) Below 1 V → 11 to 14 V
      y4-4 (FLD+) - Body ground L - Body ground Fold motor operation signal Rear power seat switch LH or Fold seat switch assembly (for Rear LH Seat) off → on (fold) Below 1 V → 11 to 14 V
      y4-7 (RCL-) - Body ground LG - Body ground Reclining motor operation signal Rear power seat switch LH off → on (return) Below 1 V → 11 to 14 V
      y4-8 (FLD-) - Body ground SB - Body ground Return motor operation signal Rear power seat switch LH or Fold seat switch assembly (for Rear LH Seat) off → on (return) Below 1 V → 11 to 14 V