CANISTER(w/o Canister Pump Module) INSTALLATION

PROCEDURE


  1. INSTALL CANISTER (CHARCOAL CANISTER ASSEMBLY)


    1. B005Q1LC01
      *a Clip
      *b Guide

      Engage the clip and install the canister (charcoal canister assembly) to the vehicle body and guide with the 3 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
    2. Connect the outlet charcoal canister tube sub-assembly to the canister (charcoal canister assembly) and slide the clip to secure it.

      Tech Tips

      Engage the clip within the area shown in the illustration.

      B005PLNC01
      *a Charcoal Canister Hose *b Outlet Charcoal Canister Tube Sub-assembly
      *c 2 to 7 mm (0.0787 to 0.276 in.) *d 120°
      *e Upper - -
    3. Connect the charcoal canister hose to the fuel tube and slide the clip to secure it.

      Tech Tips

      Engage the clip within the area shown in the illustration.

    4. B005PYSC02
      *a Retainer
      *b Claw
      B005NIZ Push
      B005LWS Push in

      Push the fuel tank vent hose sub-assembly onto the canister (charcoal canister assembly) and push in the retainer to engage the 2 claws.

      Note


      • Check that there are no scratches or foreign matter around the connecting parts of the fuel tank vent hose sub-assembly and pipe (canister (charcoal canister assembly)) before performing this work.

      • After connecting the fuel tank vent hose sub-assembly, check that the fuel tank vent hose sub-assembly is securely connected by pulling on the tube connector.

  2. INSTALL CHARCOAL CANISTER PROTECTOR


    1. Install the charcoal canister protector with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
  3. INSTALL TAIL EXHAUST PIPE ASSEMBLY


    1. Install 2 new exhaust pipe gaskets to the center exhaust pipe assembly (TWC: Rear Catalyst) and tail exhaust pipe assembly.

    2. Connect the tail exhaust pipe assembly to the 2 exhaust pipe supports.

    3. Install the tail exhaust pipe assembly to the center exhaust pipe assembly (TWC: Rear Catalyst) and No. 2 tail exhaust pipe assembly with the 4 bolts.

      Torque:
      55 N*m  { 561 kgf*cm, 41 ft.*lbf }
  4. INSPECT FOR EXHAUST GAS LEAK

    Click here