AUTOMATIC HIGH BEAM SYSTEM CUSTOMIZE PARAMETERS
CUSTOMIZE AUTOMATIC HIGH BEAM SYSTEM
Tip:The following items can be customized.
Note:When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control.
Select the setting by referring to the table below.
Light Control
Tester Display
Description
Default
Setting
ECU
Automatic High Beam
Enabling (ON) or disabling (OFF) of the automatic high beam function
ON
0:OFF,1:ON
Main Body ECU (Multiplex Network Body ECU)