CAMSHAFT OIL CONTROL VALVE INSTALLATION
PROCEDURE
INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
for Intake Side
-
*1
O-ring
Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.
Note:Do not damage the O-ring.
Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.
10 N*m
102 kgf*cm
7 ft.*lbf
Note:If a component has been dropped or subjected to a strong impact, replace it.
Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover sub-assembly).
Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.
Connect the camshaft timing oil control valve assembly connector.
-
for Exhaust Side
-
*1
O-ring
Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.
Note:Do not damage the O-ring.
Install the camshaft timing oil control valve assembly and wire harness bracket to the cylinder head cover sub-assembly with the bolt.
10 N*m
102 kgf*cm
7 ft.*lbf
Note:If a component has been dropped or subjected to a strong impact, replace it.
Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with cylinder head cover sub-assembly).
Make sure that the O-ring is not cracked or moved out of place when installing the camshaft timing oil control valve assembly.
Connect the camshaft timing oil control valve assembly connector.
-
INSPECT FOR ENGINE OIL LEAK
INSTALL NO. 2 CYLINDER HEAD COVER