NETWORK GATEWAY ECU INSTALLATION

PROCEDURE

  1. INSTALL CENTRAL GATEWAY ECU (NETWORK GATEWAY ECU)

    1. Engage the guide.

    2. Install the central gateway ECU (network gateway ECU) with the bolt.

      12 N*m

      122 kgf*cm

      9 ft.*lbf

    3. Connect the connector.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick here