ENGINE UNIT INSTALLATION

CAUTION / NOTICE / HINT

Tip:

Perform "Inspection After Repair" after replacing the ignition coil assembly.

Click here

PROCEDURE

  1. INSTALL STUD BOLT

    1. Install the stud bolt to the engine mounting bracket RH.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

  2. INSTALL V-RIBBED BELT TENSIONER ASSEMBLY

    1. Install the V-ribbed belt tensioner assembly with the 2 bolts.

      21 N*m

      214 kgf*cm

      15 ft.*lbf

  3. INSTALL NO. 1 WATER BY-PASS PIPE

    1. Connect the hose and slide the clip to secure it.

    2. Install the No. 1 water by-pass pipe to the cylinder block with the bolt.

      22 N*m

      224 kgf*cm

      16 ft.*lbf

  4. INSTALL EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY (TWC: Front Catalyst)

  5. INSTALL MANIFOLD STAY

  6. INSTALL NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

  7. INSTALL NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

  8. INSTALL OIL LEVEL DIPSTICK GUIDE SUB-ASSEMBLY

  9. INSTALL VENTILATION HOSE

    1. Install the ventilation hose to the cylinder head cover sub-assembly and slide the clip to secure it.

  10. INSTALL NO. 2 RADIATOR HOSE

    1. Install the No. 2 radiator hose to the water inlet and slide the clip to secure it.

  11. INSTALL NO. 1 IGNITION COIL

    1. Install the 4 ignition coil assemblies with the 4 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Tip:

      Perform "Inspection After Repair" after replacing the ignition coil assembly.

      Click here

  12. INSTALL EGR VALVE ASSEMBLY

  13. INSTALL INTAKE MANIFOLD

  14. INSTALL FUEL INJECTOR ASSEMBLY

  15. INSTALL FUEL DELIVERY SPACER

  16. INSTALL FUEL DELIVERY PIPE