RELAY ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT HEATER RELAY

    1. for PTC heater 600W type

      1. E222294N13
        E218162N13

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        3 - 5

        Battery voltage is not applied between terminals 1 and 2

        10 kΩ or higher

        3 - 5

        Battery voltage is applied between terminals 1 and 2

        Below 1 Ω

        • If the result is not as specified, replace the heater relay.

    2. E218162N12

      for PTC heater 495W type

      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance

        Tester Connection

        Condition

        Specified Condition

        3 - 5

        Battery voltage is not applied between terminals 1 and 2

        10 kΩ or higher

        3 - 5

        Battery voltage is applied between terminals 1 and 2

        Below 1 Ω

        • If the result is not as specified, replace the heater relay.