CRUISE CONTROL SYSTEM(for 1ND-TV with Driving support ECU) Cruise Main Indicator Light Circuit

DTC Code DTC Name
Cruise Main Indicator Light Circuit

DESCRIPTION

  • The driving support ECU assembly turns on the cruise control indicator by sending indicator output demand signals to the combination meter assembly via CAN communication.

  • The cruise control indicator illuminates in green when the cruise control system is turned on using the cruise control switch (ON-OFF button). If a malfunction is detected, the cruise control indicator changes to amber (w/ multi-information display (segment LCD type)), or the cruise control indicator goes out and a warning message is displayed (w/ multi-information display (dot LCD type)).

  • The cruise control indicator circuit uses CAN communication. If the cruise control indicator is not functioning correctly, check for CAN communication DTCs before troubleshooting this circuit.

PROCEDURE

  1. PERFORM ACTIVE TEST USING GTS

    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Combination Meter / Active Test.

    5. Check the cruise control indicator by performing the Active Test.

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Measurement Item

      Control Range

      Diagnostic Note

      Indicat. Lamp Cruise

      Cruise control indicator (illuminated in green)

      ON / OFF

      -

      Cruise Indicator

      Cruise control indicator (illuminated in amber)

      ON / OFF

      w/ Multi-information Display (Segment LCD Type)

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Indicat. Lamp Cruise

      Body Electrical > Combination Meter > Active Test

      Tester Display

      Cruise Indicator

      OK

      The cruise control indicator comes on or goes out.

    6. Turn the ignition switch off.

    Result

    Result

    Proceed to

    OK

    A

    NG (for Hatchback, Wagon)

    B

    NG (for Sedan)

    C

    A

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    B

    REPLACE COMBINATION METER ASSEMBLY

    C

    REPLACE COMBINATION METER ASSEMBLY