ROOM TEMPERATURE SENSOR INSTALLATION
PROCEDURE
INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR
Connect the connector and aspirator.
Engage the 2 claws to install the cooler (room temp. sensor) thermistor.
INSTALL NO. 1 SWITCH HOLE BASE (for LHD)
INSTALL NO. 1 SWITCH HOLE BASE (for RHD)
INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
INSTALL NO. 1 METER HOOD CLUSTER
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (for LHD with Entry and Start System)
Note:When disconnecting the cable, some systems need to be initialized after the cable is reconnected.