REAR SEAT INNER BELT ASSEMBLY(for Sedan) INSPECTION

PROCEDURE

  1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

    1. B332789C02

      *a

      Component without harness connected

      (Rear Seat Inner with Center Belt Assembly LH)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 - 2

      Rear center seat belt not fastened

      Below 1 Ω

      1 - 2

      Rear center seat belt fastened

      10 kΩ or higher

      3 - 4

      Rear LH seat belt not fastened

      Below 1 Ω

      3 - 4

      Rear LH seat belt fastened

      10 kΩ or higher

      If the result is not as specified, replace the rear seat inner with center belt assembly LH.