LUGGAGE DOOR LOCK CONTROL CABLE ASSEMBLY(for LHD) REMOVAL

PROCEDURE

  1. REMOVE FRONT SEAT ASSEMBLY LH

  2. REMOVE FRONT SEAT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  3. REMOVE REAR SEATBACK ASSEMBLY RH

  4. REMOVE FRONT DOOR SCUFF PLATE LH

  5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  6. REMOVE REAR DOOR SCUFF PLATE LH

  7. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

  8. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)

  9. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

  10. REMOVE CENTER PILLAR LOWER GARNISH LH

  11. REMOVE FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  12. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure as for the LH side.

  13. REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  14. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure as for the LH side.

  15. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

  16. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  17. REMOVE CENTER PILLAR LOWER GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  18. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick hereClick here

  19. REMOVE REAR SEAT SIDE GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

    Click hereClick hereClick here

  20. REMOVE LUGGAGE COMPARTMENT DOOR COVER

  21. REMOVE LUGGAGE COMPARTMENT DOOR HINGE COVER RH

  22. REMOVE REAR FLOOR FINISH PLATE

    1. B351011

      Using a clip remover, remove the 2 clips.

    2. B351012

      Disengage the 4 claws and 6 guides and remove the rear floor finish plate.

  23. REMOVE LUGGAGE COMPARTMENT SIDE TRAY ASSEMBLY

    1. B351014

      Disengage the 5 guides and remove luggage compartment side tray assembly.

  24. REMOVE JACK ASSEMBLY

    1. Remove the jack assembly.

  25. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    1. B351015C01

      *a

      Pin

      Push the pin and remove the No. 1 luggage compartment trim hook.

  26. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH

    1. B351017

      Using a clip remover, remove the 3 clips and luggage compartment trim cover assembly RH.

  27. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

    1. B350997

      Remove the screw.

    2. B350999

      Disengage the guide and disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.

    3. B351003

      Disconnect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly and remove the fuel lid lock open lever sub-assembly.

  28. REMOVE LUGGAGE DOOR LOCK CONTROL CABLE SUB-ASSEMBLY

    1. B351005

      Disengage the 2 clamps.

    2. B351006

      Disengage the 2 clamps.

    3. B351007

      Using a clip remover, remove the clip.

    4. Turn back the floor carpet so that the luggage door lock control cable sub-assembly can be removed.

    5. B351009

      Disengage the 2 claws as shown in the illustration.

    6. B351010

      Disconnect the luggage door lock control cable sub-assembly.

    7. B351020

      Disengage the 6 clamps and disconnect the luggage door lock control cable sub-assembly.

    8. Disengage the 9 clamps and remove the luggage door lock control cable sub-assembly.

      B351018