SIMPLE INTELLIGENT PARKING ASSIST SYSTEM, Diagnostic DTC:C164A
| DTC Code | DTC Name |
|---|---|
| C164A | EPS Communication Malfunction |
DESCRIPTION
This DTC is stored when the clearance warning ECU assembly receives communication malfunction signal from the power steering ECU assembly via CAN communication.
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
|---|---|---|---|
C164A |
EPS Communication Malfunction |
EPS communication malfunction |
|
CAUTION / NOTICE / HINT
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization may be needed. Refer to Initialization.
PROCEDURE
CHECK DTC OUTPUT
Clear the DTCs.
Body Electrical > Clearance Sonar / Simple-IPA. > Clear DTCs
Recheck for DTCs and check if the same DTC is output again.
Body Electrical > Clearance Sonar / Simple-IPA. > Trouble Codes
OK
No DTCs are output.
Tip:If the DTC is not output again when rechecking for DTCs, it may have been stored due to a temporary communication problem between the clearance warning ECU assembly and power steering ECU assembly.
If DTC C164A is output frequently, duplicate the conditions that caused the problem symptoms and perform the inspection again, even though DTCs were not output when rechecking for DTCs.
Result
Proceed to
OK
NG
REPLACE CLEARANCE WARNING ECU ASSEMBLY
Replace the clearance warning ECU assembly.
for Hatchback LHD, Wagon LHD:Click here
for Hatchback RHD, Wagon RHD:Click here
for Sedan:Click hereClick here
Result
Proceed to
NEXT
CHECK DTC OUTPUT
Clear the DTCs.
Body Electrical > Clearance Sonar / Simple-IPA. > Clear DTCs
Recheck for DTCs and check if the same DTC is output again.
Body Electrical > Clearance Sonar / Simple-IPA. > Trouble Codes
OK
No DTCs are output.
Result
Proceed to
OK
NG
OK END (CLEARANCE WARNING ECU ASSEMBLY WAS DEFECTIVE)
CHECK DTC OUTPUT (POWER STEERING SYSTEM)
Check for DTCs.
Chassis > EMPS > Trouble Codes
OK
No DTCs are output.
Result
Proceed to
OK
NG