MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION

PROCEDURE

  1. INSTALL DIESEL TURBO PRESSURE SENSOR

    1. A201856C01

      *1

      Protrusion

      Install the diesel turbo pressure sensor with the bolt.

      8.8 N*m

      90 kgf*cm

      78 in.*lbf

      Note:
      • Make sure that the protrusion of the gas filter bracket is inserted into the hole of the sensor.

      • If a component has been dropped or subjected to a strong impact, replace it.

    2. Connect the connector to the diesel turbo pressure sensor.

    3. Connect the vacuum hose.

  2. INSTALL NO. 1 ENGINE COVER