INTAKE MANIFOLD REMOVAL
PROCEDURE
REMOVE THROTTLE BODY ASSEMBLY
REMOVE INTAKE MANIFOLD
-
Disengage the 4 wire harness clamps.
Remove the bolt and wire harness clamp bracket.
-
Remove the engine cover joint and disconnect the wire harness clamp bracket.
Disengage the wire harness clamp.
-
Disconnect the No. 1 fuel vapor feed hose from the intake manifold.
-
Slide the clip and disconnect the No. 1 vacuum transmitting hose from the intake manifold.
-
Slide the clip and disconnect the No. 1 ventilation hose from the intake manifold.
-
Remove the 4 bolts, 2 nuts, intake manifold and intake manifold stay.
-
Remove the No. 1 intake manifold to head gasket from the intake manifold.
-
Remove the engine cover joint from the intake manifold.
-
REMOVE STUD BOLT (w/ Stud Bolt)
Tip:If a stud bolt is deformed or the threads are damaged, replace it.
-
Using an E6 "TORX" socket wrench, remove the 2 stud bolts from the intake manifold.
-