FRONT WIPER MOTOR REMOVAL

PROCEDURE

  1. REMOVE FRONT WIPER ARM HEAD CAP

    1. E264921C01

      *a

      Protective Tape

      Using a screwdriver, disengage the 3 claws and remove the front wiper arm head cap.

      Tip:
      • Tape the screwdriver tip before use.

      • Use the same procedure for the RH side and LH side.

  2. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH

    1. E264922

      Remove the nut and windshield wiper arm and blade assembly LH.

  3. REMOVE WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH

    1. E264923

      Remove the nut and windshield wiper arm and blade assembly RH.

  4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH (for Hatchback, Wagon)

    1. E264924

      Disengage the 2 claws.

    2. E264925C01
      V100155

      Double-sided Tape

      Disengage the 3 guides, separate the double-sided tape and remove the front fender to cowl side seal LH as shown in the illustration.

  5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH (for Hatchback, Wagon)

    Tip:

    Use the same procedure as for the LH side.

  6. REMOVE FRONT NO. 2 SIDE PANEL PROTECTOR LH (for Sedan)

    1. E278217

      Disengage the 2 claws and guide.

    2. E278218C01
      V100155

      Double-sided Tape

      Separate the double-sided tape, disengage the claw and 2 guides and remove the front No. 2 side panel protector LH as shown in the illustration.

  7. REMOVE FRONT NO. 2 SIDE PANEL PROTECTOR RH (for Sedan)

    Tip:

    Use the same procedure as for the LH side.

  8. REMOVE FRONT NO. 2 SIDE PANEL PROTECTOR LH (for Hatchback, Wagon)

    1. E264926

      Remove the clip.

    2. Disengage the claw and remove the front No. 2 side panel protector LH.

  9. REMOVE FRONT NO. 2 SIDE PANEL PROTECTOR RH (for Hatchback, Wagon)

    1. E265021

      Remove the clip.

    2. Disengage the 2 claws and remove the front No. 2 side panel protector RH.

  10. REMOVE NO. 1 RADIATOR GRILLE SEAL LH (for Sedan)

    1. E278220

      Remove the clip.

    2. Remove the No. 1 radiator grille seal LH as shown in the illustration.

  11. REMOVE NO. 1 RADIATOR GRILLE SEAL RH (for Sedan)

    Tip:

    Use the same procedure as for the LH side.

  12. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Hatchback, Wagon)

    1. Remove the 2 clips.

      E264928
    2. Disengage the 6 claws and 3 guides as shown in the illustration.

      E264929
    3. Disengage the 8 guides and remove the cowl top ventilator louver sub-assembly as shown in the illustration.

      E264930
  13. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY (for Sedan)

    1. Remove the 2 clips.

      E278222
    2. Disengage the 6 claws and 3 guides as shown in the illustration.

      E278223
    3. Disengage the 8 guides and remove the cowl top ventilator louver sub-assembly as shown in the illustration.

      E278224
  14. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    1. E264931

      Disengage the 2 clamps.

    2. Remove the 2 bolts.

    3. E264932C01

      *a

      Motor Grommet

      Disengage the motor grommet as shown in the illustration and remove the windshield wiper motor and link assembly.

      Note:

      Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

    4. E264933

      Disconnect the connector.

  15. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY

    1. E264934C01

      *a

      Protective Tape

      *b

      Windshield Wiper Crank Pivot

      Using a screwdriver, separate the No. 1 windshield wiper link rod from the windshield wiper crank pivot of the windshield wiper motor and link assembly as shown in the illustration.

      Tip:

      Tape the screwdriver tip before use.

    2. E264935

      Remove the 3 bolts and windshield wiper motor assembly from the windshield wiper link assembly.

      Tip:

      If the windshield wiper motor assembly cannot be removed from the windshield wiper link assembly, turn the crank arm so that the windshield wiper motor assembly can be removed.