FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan RHD) REMOVAL

PROCEDURE

  1. REMOVE FRONT SEAT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY LH

    Tip:

    Use the same procedure as for the RH side.

  3. REMOVE REAR SEATBACK ASSEMBLY LH

  4. REMOVE FRONT DOOR SCUFF PLATE LH

  5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH

  6. REMOVE REAR DOOR SCUFF PLATE LH

  7. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH

  8. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)

  9. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH

  10. REMOVE CENTER PILLAR LOWER GARNISH LH

  11. REMOVE FRONT DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  12. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure as for the LH side.

  13. REMOVE REAR DOOR SCUFF PLATE RH

    Tip:

    Use the same procedure as for the LH side.

  14. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tip:

    Use the same procedure as for the LH side.

  15. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tip:

    Use the same procedure as for the LH side.

  16. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tip:

    Use the same procedure as for the LH side.

  17. REMOVE CENTER PILLAR LOWER GARNISH RH

    Tip:

    Use the same procedure as for the LH side.

  18. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY

  19. REMOVE REAR SEAT SIDE GARNISH LH

  20. REMOVE REAR FLOOR FINISH PLATE

  21. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

  22. REMOVE FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

  23. REMOVE FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

    1. B351006

      Disengage the 2 clamps.

    2. B351005

      Disengage the 2 clamps.

    3. B351007

      Using a clip remover, remove the clip.

    4. Turn back the floor carpet so that the fuel lid lock control cable sub-assembly can be removed.

    5. B351191

      Disengage the 2 claws and disconnect the fuel lid lock control cable sub-assembly.

    6. Disengage the 10 clamps and remove the fuel lid lock control cable sub-assembly.

      B351193